2003 Pontiac Aztek V6-3.4L VIN EFACTORY OEM SERVICE PROCEDURE

System Specifications

A/C Condenser Mounting Bolts 53 inch lbs.
A/C Condenser Tube Clip Bolt 22 inch lbs.
Coolant Heater Bolt 18 in.lbs.
Cooling Fan Motor Screws 53 inch lbs.
Cooling Fan Nut 53 inch lbs.
Cooling Fan Shroud Bolts 53 inch lbs.
Discharge Hose to Condenser Nut 12 ft. lbs.
Evaporator Inlet Tube to Condenser Bolt 12 ft. lbs.
Radiator Bracket Bolts 18 ft. lbs.
Radiator Lower Air Deflector Bolts 15 ft. lbs.
Radiator Upper Mount Bolts 89 inch lbs.
Thermostat Bypass Pipe Bolt 98 inch lbs.
Thermostat Bypass Pipe Nut 18 ft. lbs.
Thermostat Housing Bolts 18 ft. lbs.
Water Pump Bolts 89 inch lbs.
Water Pump Pulley Bolts 18 ft. lbs.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.