2003 Pontiac Aztek FWDFACTORY OEM SERVICE PROCEDURE

Service Intervals

Change the ATF and filter every 50,000 miles if the vehicle is mainly driven under one or more of these conditions:

  • In heavy traffic where the outside temperature regularly reaches 90Β°F (32Β°C) or higher.
  • In hilly or mountainous terrain.
  • When doing frequent towing.
  • Uses such as found in taxi, police or delivery service.

If the vehicle is not used under any of these conditions, change the fluid and filter every 100,000 miles.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.