Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Pontiac Aztek AWDFACTORY OEM SERVICE PROCEDURE
Body Control Module DTCS
BODY CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| DTC B0008 | Short To Battery In The Park Neutral Position Circuit |
| DTC B1000 | Internal Write Malfunction |
| DTC B1004 | KAM In The Module Has Been Reset |
| DTC B1007 | EEPROM Error |
| DTC B1009 | EEPROM Error |
| DTC B1440 | Monitored Ignition Switch Circuit Malfunction |
| DTC B1507 or B1508 | Load Control Circuit Does Not React As Commanded |
| DTC C0550 | Internal Write Malfunction |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.