Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Pontiac Aztek V6-3.4L VIN EFACTORY OEM SERVICE PROCEDURE
Programming Features - With Driver Information Center (DIC)
ENTER PROGRAMMING
To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the LOCK button on the keyless entry transmitter whose number corresponds to the correct driver for this session of personalization.
4. Press the MODE button for the DIC until the DIC displays PERSONALIZATION FOR DRIVER #, where # equals the current driver number.
5. Press the SET button for the DIC to enter programming mode.
The PROGRAM MODE indicator illuminates providing the status.
6. The DIC displays PRESS MODE FOR NEXT OPTION and then PRESS SET TO CHANGE OPTION.
HEADLAMP EXIT DELAY
Continue with the following steps in order to personalize the headlamp exit delay feature:
1. The DIC displays HEADLAMP EXIT DELAY: OFF/15/30/60.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
DELAYED ILLUMINATION
Continue with the following steps in order to personalize the delayed illumination feature:
1. The DIC displays INTERIOR LIGHTING DELAY: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
4. If the previous choice was INTERIOR LIGHTING DELAY ON, the DIC displays INTERIOR LIGHTING ON: KEY OUT/DOOR.
5. Press the SET button in order to place the arrow before the desired choice.
6. Press the MODE button in order to advance to the next option.
AUTOMATIC DOOR LOCKS
Continue with the following steps in order to personalize the automatic door locks:
1. The DIC displays AUTO DOOR LOCKS: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
4. If the previous choice was AUTO DOOR LOCKS ON, the DIC displays AUTO DOOR UNLOCK: OFF/DRIVER/ALL.
5. Press the SET button in order to place the arrow before the desired choice.
6. Press the MODE button in order to advance to the next option.
7. If the previous choice was AUTO DOOR UNLOCK DRIVER or AUTO DOOR UNLOCK ALL, the DIC displays UNLOCK: PARK/KEY OUT.
8. Press the SET button in order to place the arrow before the desired choice.
9. Press the MODE button in order to advance to the next option.
DELAYED LOCKING
Continue with the following steps in order to personalize the delayed locking feature:
1. The DIC displays DELAYED LOCKING: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
REMOTE DRIVER DOOR UNLOCK
Continue with the following steps in order to personalize the remote driver door unlock feature:
1. The DIC displays REMOTE DOOR UNLOCK: DRIVER/ALL/ALL.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance on to the next option.
REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to personalize the remote activation verification feature:
1. The DIC displays UNLOCK FEEDBACK: OFF/LIGHTS.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance on to the next option.
4. The DIC displays LOCK FEEDBACK: OFF/LIGHTS/HORN.
5. Press the SET button to place the arrow before the desired choice.
6. Press the MODE button in order to advance on to the next option.
SEAT RECALL
Continue with the following steps in order to personalize the seat recall feature:
1. Press the MODE button until SEAT RECALL appears on the DIC.
2. Press the SET button until the arrow is before either OFF or ON
3. Press the mode button in order to advance to the next option.
4. The DIC displays RECALL POSITION.
5. Press the SET button to place the arrow before the desired choice, MEMORY or EXIT.
6. Press the MODE button in order to advance to the next option.
TILT MIRROR
Continue with the following steps in order to personalize the tilt mirror feature:
1. Press the MODE button until TILT MIRROR appears on the DIC.
2. Press the SET button until the arrow is before OFF or ON.
3. Press the MODE button in order to advance to the next option.
EXIT PROGRAMMING
When the programming is complete, PERSONALIZATION SELECTION DONE appears on the display. The DIC then displays PRESS SET TO EXIT then PRESS MODE TO CONTINUE. Any of the following conditions cause the programming to end before the list is complete:
^ The programming timer of one minute expires.
^ The vehicle is shifted out of PARK.
^ The ignition is moved from the RUN position.
To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the LOCK button on the keyless entry transmitter whose number corresponds to the correct driver for this session of personalization.
4. Press the MODE button for the DIC until the DIC displays PERSONALIZATION FOR DRIVER #, where # equals the current driver number.
5. Press the SET button for the DIC to enter programming mode.
The PROGRAM MODE indicator illuminates providing the status.
6. The DIC displays PRESS MODE FOR NEXT OPTION and then PRESS SET TO CHANGE OPTION.
HEADLAMP EXIT DELAY
Continue with the following steps in order to personalize the headlamp exit delay feature:
1. The DIC displays HEADLAMP EXIT DELAY: OFF/15/30/60.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
DELAYED ILLUMINATION
Continue with the following steps in order to personalize the delayed illumination feature:
1. The DIC displays INTERIOR LIGHTING DELAY: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
4. If the previous choice was INTERIOR LIGHTING DELAY ON, the DIC displays INTERIOR LIGHTING ON: KEY OUT/DOOR.
5. Press the SET button in order to place the arrow before the desired choice.
6. Press the MODE button in order to advance to the next option.
AUTOMATIC DOOR LOCKS
Continue with the following steps in order to personalize the automatic door locks:
1. The DIC displays AUTO DOOR LOCKS: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
4. If the previous choice was AUTO DOOR LOCKS ON, the DIC displays AUTO DOOR UNLOCK: OFF/DRIVER/ALL.
5. Press the SET button in order to place the arrow before the desired choice.
6. Press the MODE button in order to advance to the next option.
7. If the previous choice was AUTO DOOR UNLOCK DRIVER or AUTO DOOR UNLOCK ALL, the DIC displays UNLOCK: PARK/KEY OUT.
8. Press the SET button in order to place the arrow before the desired choice.
9. Press the MODE button in order to advance to the next option.
DELAYED LOCKING
Continue with the following steps in order to personalize the delayed locking feature:
1. The DIC displays DELAYED LOCKING: OFF/ON.
2. Press the SET button in order to place the arrow before the desired choice.
3. Press the MODE button in order to advance to the next option.
REMOTE DRIVER DOOR UNLOCK
Continue with the following steps in order to personalize the remote driver door unlock feature:
1. The DIC displays REMOTE DOOR UNLOCK: DRIVER/ALL/ALL.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance on to the next option.
REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to personalize the remote activation verification feature:
1. The DIC displays UNLOCK FEEDBACK: OFF/LIGHTS.
2. Press the SET button to place the arrow before the desired choice.
3. Press the MODE button in order to advance on to the next option.
4. The DIC displays LOCK FEEDBACK: OFF/LIGHTS/HORN.
5. Press the SET button to place the arrow before the desired choice.
6. Press the MODE button in order to advance on to the next option.
SEAT RECALL
Continue with the following steps in order to personalize the seat recall feature:
1. Press the MODE button until SEAT RECALL appears on the DIC.
2. Press the SET button until the arrow is before either OFF or ON
3. Press the mode button in order to advance to the next option.
4. The DIC displays RECALL POSITION.
5. Press the SET button to place the arrow before the desired choice, MEMORY or EXIT.
6. Press the MODE button in order to advance to the next option.
TILT MIRROR
Continue with the following steps in order to personalize the tilt mirror feature:
1. Press the MODE button until TILT MIRROR appears on the DIC.
2. Press the SET button until the arrow is before OFF or ON.
3. Press the MODE button in order to advance to the next option.
EXIT PROGRAMMING
When the programming is complete, PERSONALIZATION SELECTION DONE appears on the display. The DIC then displays PRESS SET TO EXIT then PRESS MODE TO CONTINUE. Any of the following conditions cause the programming to end before the list is complete:
^ The programming timer of one minute expires.
^ The vehicle is shifted out of PARK.
^ The ignition is moved from the RUN position.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
