Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Pontiac Aztek V6-3.4L VIN EFACTORY OEM SERVICE PROCEDURE
Piston, Engine
| Piston - non-coated | Diameter-Gaged on the skirt 50 mm (0.02 inch) from the top of piston - production | 3.6215 - 3.222 inch |
| Diameter-Gaged on the skirt 50 mm (0.02 inch) from the top of piston - service limit | 3.620 - 3.621 inch | |
| Clearance - production | 0.0006 - 0.0020 inch | |
| Clearance - service limit | 0.0019 - 0.0033 inch | |
| Pin Bore | 0.9057 - 0.9059 inch | |
| Piston - Grafal coated | Diameter-Gaged on the skirt 50 mm (0.02 inch) from the top of piston production - | 3.6217 - 3.6232 inch |
| Diameter-Gaged on the skirt 50 mm (0.02 inch) from the top of piston - | 3.6201 - 3.6216 inch | |
| Clearance - production | 0.00031 - 0.0019 inch | |
| Clearance - service limit | 0.0013 - 0.0035 inch | |
| Pin Bore | 0.9057 - 0.9059 inch | |
| Piston Ring | Top Groove Side Clearance | 0.002 - 0.0034 inch |
| Second Groove Side Clearance | 0.002 - 0.0035 inch | |
| Top Ring Gap | 0.008 - 0.019 inch | |
| Second Ring Gap | 0.0213 - 0.0339 inch | |
| Oil Ring Groove Clearance | 0.0018 - 0.0079 inch | |
| Gap in Cylinder Bore | 0.012 - 0.035 inch |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
