Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Pontiac Aztek V6-3.4L VIN EFACTORY OEM SERVICE PROCEDURE
System Specifications
| A/C Condenser Mounting Bolts | 53 inch lbs. |
| A/C Condenser Tube Clip Bolt | 22 inch lbs. |
| Coolant Heater Bolt | 18 in.lbs. |
| Cooling Fan Motor Screws | 53 inch lbs. |
| Cooling Fan Nut | 53 inch lbs. |
| Cooling Fan Shroud Bolts | 53 inch lbs. |
| Discharge Hose to Condenser Nut | 12 ft. lbs. |
| Evaporator Inlet Tube to Condenser Bolt | 12 ft. lbs. |
| Radiator Bracket Bolts | 18 ft. lbs. |
| Radiator Lower Air Deflector Bolts | 15 ft. lbs. |
| Radiator Upper Mount Bolts | 89 inch lbs. |
| Thermostat Bypass Pipe Bolt | 98 inch lbs. |
| Thermostat Bypass Pipe Nut | 18 ft. lbs. |
| Thermostat Housing Bolts | 18 ft. lbs. |
| Water Pump Bolts | 89 inch lbs. |
| Water Pump Pulley Bolts | 18 ft. lbs. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
