2001 Pontiac Aztek Base, FWDFACTORY OEM SERVICE PROCEDURE

DTC P0404: EGR Open Position Performance: Description

PCM monitors EGR valve pintle position input to ensure that valve responds properly to commands from PCM. PCM compares actual EGR position with desired EGR position when valve is commanded open. If actual EGR position is 15 percent less than desired EGR position when PCM is commanding EGR valve open, DTC will set.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.