Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Pontiac Sunfire L4-2.2L VIN 4FACTORY OEM SERVICE PROCEDURE
Lean/Rich Avg.
Range 0-249 mS Counts
The PCM takes the Lean/Rich transition times following the completion of the data collection period as specified in the Conditions for Setting in DTC P0133 and DTC P1133. Then the PCM averages the transition time from the total transition times
The PCM takes the Lean/Rich transition times following the completion of the data collection period as specified in the Conditions for Setting in DTC P0133 and DTC P1133. Then the PCM averages the transition time from the total transition times
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
