Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Pontiac Firefly (CANADA) L4-1.3LFACTORY OEM SERVICE PROCEDURE
Engine Mount
| Rear Engine Mount Frame Bracket-To-Frame Bolts | 41 Foot Pound-Force (ft.lb) |
| Rear Engine Mount Connecting Bracket-To-Rear Engine Mount Frame Bracket Nuts | 41 Foot Pound-Force (ft.lb) |
| Rear Engine Mount-To-Engine Bracket Nut | 41 Foot Pound-Force (ft.lb) |
| Rear Engine Mount-To-Bulkhead Bolts | 41 Foot Pound-Force (ft.lb) |
| Rear Engine Mount-To-Engine Bracket-To-Engine Bolts and Nut | 41 Foot Pound-Force (ft.lb) |
| Rear Engine Mount Through Bolts and Nut | 41 Foot Pound-Force (ft.lb) |
| Right Engine Mount Through Botls | 41 Foot Pound-Force (ft.lb) |
| Right Engine Mount-To-Mounting Bracket Bolts | 41 Foot Pound-Force (ft.lb) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.