Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Pontiac Firefly (CANADA) L4-1.3LFACTORY OEM SERVICE PROCEDURE
Long Term FT-2
The scan tool display is counts. The PCM derives the Long Term Fuel Trim (FT) from the Short Term FT value. The Long Term FT represents a long-term correction in the fuel delivery. A value of 128 counts indicates that fuel delivery requires no compensation in order to maintain the desired air/fuel ratio. A value significantly less than 128 indicates that the fuel system is rich. When the fuel system is rich, the PCM reduces fuel delivery by decreasing injector pulse width. A value significantly greater than 128 indicates that a lean condition exists. During a lean condition the PCM increases fuel delivery by increasing injector pulse width. Fuel trim values at maximum authority may indicate an excessively rich or lean condition.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.