Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Pontiac Trans SportFACTORY OEM SERVICE PROCEDURE
Engine Control System - Specifications: Capacities
BATTERY SPECIFICATIONS
| Application | Cold Crank Amps @ 0°F (-18°C) | Reserve Capacity Minutes |
|---|---|---|
| 3.4L (VIN E) | 525 | 90 |
FLUID CAPACITIES
| Application | (1) Quantity: Qts. (L) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Crankcase | (2) 4.0 (3.8) | |||||||||
| Cooling System (Includes Heater) (3) | ||||||||||
| With Rear Heater | 12.4 (11.75) | |||||||||
| Without Rear Heater | 11.8 (11.25) | |||||||||
| Automatic Transaxle (Dexron-II) (4) | 6 (5.7) | |||||||||
|
||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.