Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Pontiac Firebird Formula, 5.0 F, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 3.50 LBS. | 1.58 KG | R-12 | S | |||
| Automatic Transmission Fluid | 10.00 PTS. | 4.73 L | Automatic Transmission Fluid DEXRON IIE | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Clutch Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 5.0L Eng | w/Air Cond | 18.00 QTS. | 17.03 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 5.0L Eng | w/Rear Heater | 17.40 QTS. | 16.46 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | 5.0L Eng | 5.00 QTS. | 4.73 L | API - SAE 5W-30 | S | ||
| Fuel Tank | 15.50 GALS. | 58.67 L | S | ||||
| Manual Transmission Fluid | 5.90 PTS. | 2.79 L | Automatic Transmission Fluid DEXRON II | S | |||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 1050017. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
