Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1987 Pontiac Fiero Base, AutomaticFACTORY OEM SERVICE PROCEDURE
2.8L PFI Tests W/Codes
- Model Identification
- Description
- Operation
- Diagnosis & Testing
- Scan Tester Usage
- Diagnostic Charts
- Diagnostic Circuit Check
- Chart A1 - No "Service Engine Soon" ("SES") Light
- Chart A2 - No ALDL/Won't Flash Code 12 "SES" Light On Steady
- Chart A3 - Cranks, But Won't Run
- Chart A7 - Fuel System Diagnosis
- Chart A9 - Cold Start Valve
- Chart B1 - Restricted Exhaust System Check
- Code 13 - Open Oxygen Sensor Circuit
- Code 14 - Coolant Temperature Sensor (Cts) Signal Voltage Low
- Code 15 - Cts Signal Voltage High
- Code 21 - TPS Signal Voltage High
- Code 22 - Throttle Position Sensor Signal Voltage Low
- Code 23 - Mat Sensor Signal Voltage High
- Code 24 - VSS
- Code 25 - Manifold Air Temperature Sensor Signal Voltage Low
- Code 32 - EGR System Failure
- Code 33 - Map Sensor Voltage High
- Code 34 - Map Sensor Voltage Low
- Code 35 - Idle Speed Error
- Code 42 - Est (W/HEI)
- Code 44 - Lean Exhaust Indication
- Code 45 - Rich Exhaust Indication
- Code 52 - CALPAK Error
- Code 53 - System OVERVOLTAGE
- Code 55 - ECM Error
- Component Check (C Charts)
- Component Locations
- ECM Terminal Identification
- Wiring Diagrams
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.