Alignment Specifications

1987 Pontiac 6000 SafariSECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS

Application Specification
Camber (Degrees) Front 0 +/- 5
Camber (Degrees) Rear 0 +/- 2.5
Caster (Degrees) Front +1.9 +/- 1
Caster (Degrees) Rear N/A
Toe-In (Inches) Front 0 +/- 3/32
Toe-In (Inches) Rear +5/23 +/- 3/32
Toe-In (Millimeters) Front 0 +/- 2
Toe-In (Millimeters) Rear +4 +/- 2
Toe-In (Degrees) Front 0 +/- 0.1
Toe-In (Degrees) Rear +0.3 +/- 0.2
Toe-Out On Turns - Inner (Front) N/A
Toe-Out On Turns - Outer (Front) N/A
Steering Axis Inclination (SAI) 14 1/2Β°
Wheelbase (Inches) 104 15/16
Wheelbase (Millimeters) 2666
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.