Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1985 Pontiac Sunbird S, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | Refill After Disassembly | 12.00 PTS. | 5.67 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Automatic Transmission Fluid | Refill After Draining | 8.00 PTS. | 3.78 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | GM Part No. 12377967 or DOT 3 equivalent. | S | ||
| Engine Coolant | Eng VIN 0,Automatic Trans | 7.90 QTS. | 7.47 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Coolant | Eng VIN 0 | 7.90 QTS. | 7.47 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Oil | 1.8L Eng | w/Filter | 5.00 QTS. | 4.73 L | SAE 5W-30 (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-30 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) | S | |
| Engine Oil | 1.8L Eng | w/o Filter | 4.50 QTS. | 4.25 L | SAE 5W-30 (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-30 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) | S | |
| Fuel Tank | 13.60 GALS. | 51.48 L | S | ||||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 1050017. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
