Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Undeployed Module
The Air Bag modules must be stored in its original special container until used for service. At no time should a source of electricity be permitted near inflator on back of an Air Bag module. When carrying or handling an undeployed Air Bag module, trim side of Air Bag should be pointing away from body to minimize possibility of injury if accidental deployment occurs. DO NOT place undeployed Air Bag face down on a solid surface, Air Bag will propel into air if accidental deployment occurs.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.