1997 Plymouth ProwlerFACTORY OEM SERVICE PROCEDURE

Programming RKE Module

  1. Using a functional key fob transmitter, unlock vehicle and disarm Vehicle Theft Security System. Insert ignition key into ignition switch. Turn ignition switch to RUN position without starting engine. Using a functional key fob transmitter, press and hold UNLOCK button for a minimum four seconds (maximum ten seconds). While holding UNLOCK button, and before ten seconds passes, press and release PANIC button. A single chime will sound to verify that RKE module is set to receive new Vehicle Access Code(s).
  2. Within 30 seconds of chime, press any button on each new key fete transmitter. After 30 seconds or when ignition switch is turned OFF, RKE module will end programming mode. A single chime will sound to verify that RKE module will no longer receive additional Vehicle Access Code(s). When Vehicle Access Code(s) programming is complete, turn Ignition Switch to OFF position and verify RKE system operation using each key fob.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.