1977 Plymouth Arrow Base, Automatic TransFACTORY OEM SERVICE PROCEDURE

DELCO-REMY Distributor Advance Specifications

NOTE: FOR DISTRIBUTOR RPM AND DEGREES, DIVIDE THE FOLLOWING SPECIFICATIONS BY 2.
Distributor Part No. Rot(1) Centrifugal Advance (Engine RPM & Degrees) Vacuum Advance (Engine Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
11103217 C 2 1/2-6 550 3 1/2-6 600 7 1/2-9 1/2 2000 0-1 1/2 5 1/2 11 1/2-14 1/2 14 3/4
1103219 C 2 1/2-6 550 3 1/2-6 600 7 1/2-9 1/2 2000 0-1 1/2 5 1/2 11 1/2-14 1/2 14 3/4
1103221 CC -1/2-2 5/8 500 6 1/4-8 1/4 775 20-22 2500 0 7 10-12 1/2 16 1/2
1103222(2) CC -1/2-2 1/2 500 6 1/2-8 1/2 775 20-22 2500 0-2 1/2 11 8 1/4-9 3/4 19
1103229 C 0 1200 6 1600 20 4400 0 3.5 20 12
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
(2) Vacuum retard specifications are 0-2 1/2° @ 4 1/2" and 3/4-4 3/4° @ 11".
NOTE: FOR DISTRIBUTOR RPM AND DEGREES, DIVIDE THE FOLLOWING SPECIFICATIONS BY 2.
Distributor Part No Rot(1) Centrifugal Advance (Engine RPM & Degrees) Vacuum Advance (Engine Deg & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
1103230 C 0 1200 6 1600 20 4400 0 35 20 9
1103231 C 0 1200 ..... ..... 20 4400 0 35 20 12
1103239 C 0 1200 15 2700 20 4200 0 35 15 9
1103244 C 0 1000 10 1700 20 3800 0 45 20 10
1103246 C 0 1200 12 2000 22 4200 0 35 18 11
1103248 C 0 1200 15 2700 20 4200 0 35 10 7
1103252 C 0 1000 10 1700 20 3800 0 4 18 12
1103257 CC 0 1200 4 1400 17 3600 0 5 10 20
1103259 CC 0 1000 ..... ..... 19 4000 0 6 24 13
1103260 CC 0 1000 ..... ..... 13 3600 0 6 24 13
1103262 CC 0 910 17 2375 26 4465 0 4 30 11
1103263 C 0 1200 ..... ..... 20 4400 0 35 20 9
1103264 CC 0 1000 ..... ..... 13 3600 0 5 16 11
1103266 CC 0 1000 ..... ..... 19 4000 0 5 16 11
1103269 CC 0 1000 9 2000 17 4600 0 5 25 11
1103271 CC 8 1000 8 1400 16 4400 0 5 25 11
1103272 CC 0 825 10 1800 21 5 3430 0 4 25 15
1103273 CC 0 1000 17 2600 19 3600 0 4 25 12
1103275   ..... ..... ..... ..... ..... ..... ..... ..... ..... .....
1103276 CC 0 800 4 1000 ..... ..... 0 5 20 10
1103277 C 1-3 600 6-8 2500 5 1/2-8 3000 0-1 1/2 4 1/2 9 1/2-10 1/2 13
1103278 CC 0 1200 4 1400 16 4400 0 5 20 10
1103297 C 3/4-3 600 1-3 1/8 625 6-8 2500 0-1 1/2 4 1/2 9 1/2-10 1/2 13
1103298 C 1-3 600 6-8 2525 5 1/2-8 3000 0-1 1/2 5 1/3 4 1/2-5 1/2 9 3/4
1103300 C 4-6 1/8 625 7 1/2-9 1/2 2000 6 1/2-9 1/2 3000 0-1 1/2 8 1/2 4 1/2-5 1/2 12
1103303 C 0 1200 ..... ..... 20 4400 0 9 20 16
1110239 C 0 1200 15 2700 20 4200 0 4 15 10
1110244 C 0 1000 10 1700 20 3800 0 4 20 10
1110246 C 0 1200 12 2000 22 4200 0 4 18 12
1110248 C 0 1200 12 2000 22 4200 0 4 10 8
1110252 C 0 1000 10 1700 20 3800 0 4 18 12
1110256 C 0 1200 13 1600 16 2000 0 4 10 8
1110538 C 0 850 8 1200 17 2000 0 5 24 10
1110539 C 0 850 8 1200 17 2000 0 5 24 10
1110677 C 0 1400 ..... ..... 20 3600 0 4 24 11
1110678 C 0 1000 7 1600 20 4100 0 4 24 15
1110681 C 0 1000 7 1600 20 4200 0 4 15 12
1110686 C 0 1400 ..... ..... 20 3600 0 7 8 9
1110687 C 0 1200 8 2000 24 4800 0 4 26 12
1110693 C 0 1200 8 2000 24 4800 0 4 14 8
1110694   ..... ..... ..... ..... ..... ..... ..... ..... ..... .....
1110702 C 0 1200 8 2000 24 4800 0 4 30 12
1110703 C 0 1200 8 2000 24 5700 0 4 30 12
1110725 C 0 1000 7 1600 20 4200 0 5 24 12
1112990(3)                      
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
(2) See Delco-Remy MISER Ignition System in this section.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.