2001 Oldsmobile Intrigue GLSFACTORY OEM SERVICE PROCEDURE

Diagnostic Procedures

  1. If I/M system check has been performed, go to next step. If I/M system check has not been performed, go to INSPECTION/MAINTENANCE SYSTEM CHECK .
  2. Ensure vehicle is operating with conditions for running this procedure. See ENABLE CRITERIA . Turn off all accessories, including A/C and blower fan. Start engine and allow it to idle for 2 minutes. Accelerate at part throttle to 45 MPH and maintain speed for 3 minutes or until I/M system status indicator updates to YES. Using scan tool, monitor I/M system status display. If AIR system status updates to YES, go to step  5. If AIR system status did not update to YES, go to next step.
  3. Using scan tool, observe DTC information. If scan tool indicates any failed DTCs, perform appropriate diagnostic test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . If scan tool does not indicate any failed DTCs, go to next step.
  4. Using scan tool, observe NOT RAN SINCE CODE CLEARED display to determine if DTC P0410 has run. If DTC has not ran, operate vehicle under conditions to meet code enable criteria until DTC runs. See DTC P0410: SECONDARY AIR INJECTION SYSTEM  under DIAGNOSTIC TESTS. Using scan tool, observe I/M system status display. If AIR system status updated to YES, go to next step. If AIR system status did not update to YES, see DIAGNOSTIC AIDS .
  5. Using scan tool, observe emission related DTC portion of I/M system status display. If scan tool indicates any emission related DTCs, perform appropriate diagnostic test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . If scan tool does not indicate any emission related DTCs, system is okay.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.