1999 Oldsmobile Eighty-Eight BaseFACTORY OEM SERVICE PROCEDURE

Test 5: Express Down Feature Inoperative

NOTE: Improper operation of express down function may occur if excessive effort is necessary to move window up and down. This may be caused by an improperly wound window regulator spring or worn or misadjusted regulator.
  1. Check for open in Dark Blue wire between master switch assembly 10-pin connector terminal "C" and express down module 4-pin connector terminal "C". See WIRING DIAGRAMSΒ  and COMPONENT LOCATIONSΒ  . Repair as necessary. If Dark Blue wire circuit is okay, go to next step.
  2. Check for a poor connection at express down module connector terminals "A" (Brown wire) and "C" (Dark Blue wire). Repair as necessary. If connections are okay, replace express down module. See EXPRESS DOWN WINDOW MODULEΒ  under REMOVAL & INSTALLATION.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.