Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Oldsmobile Cutlass BaseFACTORY OEM SERVICE PROCEDURE
Washer Fluid Level Indicator Malfunctions: Testing
- If BFC diagnostic system check was performed, go to next step. If BFC diagnostic system check was not performed, see procedures in BFC DIAGNOSTIC SYSTEM CHECKΒ .
- Disconnect washer fluid level switch connector. Using scan tool, read BFC inputs. If washer fluid level reads OK, go to next step. If washer fluid level does not read OK, go to step 4).
- Replace washer fluid level switch.
- Back out BFC Pink 24-pin connector C3, terminal A6 (Black/White wire). Using scan tool, read BFC inputs. If washer fluid level reads OK, go to next step. If washer fluid level does not read OK, go to step 7).
- Using DVOM, check resistance between washer fluid level switch harness connector "A" (Black/White wire) and ground. If resistance is less than infinite, go to next step. If resistance is not less than infinite, go to step 7).
- Repair short to ground in Black/White wire between BFC and washer fluid level switch.
- Replace BFC. See REMOVAL & INSTALLATIONΒ .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
