1997 Oldsmobile Cutlass BaseFACTORY OEM SERVICE PROCEDURE

Automatic Transmissions DTCS

AUTOMATIC TRANSMISSIONS DTCS

DTC Description
P0218 TRANSAXLE FLUID OVERHEATING
P0502 VEHICLE SPEED SENSOR CIRCUIT (LOW INPUT)
P0503 VEHICLE SPEED SENSOR CIRCUIT (INTERMITTENT)
P0711 TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT PERFORMANCE MALFUNCTION
P0712 TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT (LOW INPUT)
P0713 TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT (HIGH INPUT)
P0716 INPUT SPEED SENSOR RANGE MALFUNCTION
P0717 INPUT SPEED SENSOR CIRCUIT (NO SIGNAL)
P0719 BRAKE SWITCH CIRCUIT LOW INPUT (SWITCH STUCK ON)
P0724 BRAKE SWITCH CIRCUIT HIGH INPUT (SWITCH STUCK OFF)
P0730 INCORRECT GEAR RATIO
P0741 TCC CIRCUIT INOPERATIVE (STUCK OFF)
P0742 TCC CIRCUIT INOPERATIVE (STUCK ON)
P0748 PRESSURE CONTROL SOLENOID ELECTRICAL MALFUNCTION
P0751 1-2 SHIFT SOLENOID ("A") PERFORMANCE MALFUNCTION
P0753 1-2 SHIFT SOLENOID ("A") ELECTRICAL MALFUNCTION
P0756 2-3 SHIFT SOLENOID ("B") PERFORMANCE MALFUNCTION
P0758 2-3 SHIFT SOLENOID ("B") ELECTRICAL MALFUNCTION
P1810 PRESSURE SWITCH ASSEMBLY (PSA) MALFUNCTION
P1811 MAXIMUM ADAPT & LONG SHIFTS
P1860 TCC PWM SOLENOID CIRCUIT (ELECTRICAL MALFUNCTION)
P1887 TCC RELEASE SWITCH CIRCUIT MALFUNCTION
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.