Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Oldsmobile Custom CruiserFACTORY OEM SERVICE PROCEDURE
Engine Controls - Tests W/O Codes
- Introduction
- Symptoms
- Hard Start - Cold (CARBURETED Models)
- Hard Start - Hot (CARBURETED Models)
- Hard Start (EFI Models)
- Stall After Start - Cold (CARBURETED Models)
- Stall After Start - Hot (CARBURETED Models)
- Stalls After Starting (EFI Models)
- Hesitation, Sag Or Stumble (CARBURETED Models)
- Hesitation, Sag Or Stumble (EFI Models)
- Vehicle Surges
- Lack Of Power Or Sluggish
- Engine Backfires
- Cuts Out, Misses
- Rough, Unstable Or Incorrect Idle
- Engine Will Not Idle (CARBURETED Models)
- Engine Will Not Idle (EFI Models; Exc. Park Avenue)
- Engine Will Not Idle (EFI Models; Park Avenue)
- Poor Fuel Economy
- Engine Dieseling/Run-On
- Detonation/Spark Knock
- Excessive Exhaust Emission (Odors)
- Turbocharger Trouble Shooting
- Symptoms
- Notes
- Engine Lacks Power
- Black Smoke
- Blue Smoke
- Excessive Oil Consumption
- Excessive Oil At Turbine End
- Excessive Oil At Compressor End
- Insufficient Lubrication
- Oil In Exhaust Manifold
- Damaged Compressor Wheel
- Damaged Turbine Wheel
- Drag Or Bind In Rotating Assembly
- Worn Bearings, Journals Or Bearing Bores
- Noisy Operation
- Sludged Or Coked Center Housing
- Probable Causes
- Symptoms
- Intermittent Problem Diagnosis
- Test Procedures
- Intermittent Trouble Shooting
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.