Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Start/Stop Off Switch
FUNCTIONS WITHIN THE SYSTEMÂ
When the start/stop OFF switch is pressed, the internal indicator lamp (on information display) turns ON, and the start/stop system can be canceled.
INDIVIDUAL FUNCTION WITHIN THE SYSTEMÂ
- Turns the internal switch ON/OFF, controlling the start/stop OFF switch signal that is input into the BCM.
- Turns the internal indicator lamp (on the information display) ON/OFF.
INDIVIDUAL OPERATIONÂ
- When the start/stop OFF switch is turned ON, the internal indicator lamp (on the information display) turns ON, and the idle start/stop system does not operate.
- When the start/stop OFF switch is turned OFF, the internal indicator lamp turns (on the information display) OFF, and the idle start/stop system operates.
COMPONENT LOCATIONÂ
The start/stop switch is set on the upper part of the center console.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.