Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Nissan-Datsun NV2500 HD SFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/Front A/C | 6.10 OZS. | 0.18 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Front and Rear A/C | 7.80 OZS. | 0.23 L | PAG 46 | S | ||
| Air Cond Refrigerant | w/o Rear A/C | 1.87 LBS. | 0.84 KG | HFC-134a (R-134a) | S | ||
| Air Cond Refrigerant | w/Rear A/C | 2.34 LBS. | 1.06 KG | HFC-134a (R-134a) | S | ||
| Automatic Transmission Fluid | 11.25 QTS. | 10.64 L | Genuine NISSAN Automatic Transmission Fluid Matic S | If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using ATF other than Matic S ATF or Matic J ATF will cause deterioration in drive ability and automatic transmission durability, and may damage the automatic transmission. | S | ||
| Brake Fluid | N/A | N/A | Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 | S | |||
| Differential Gear Oil | 5.50 PTS. | 2.6 L | Genuine NISSAN differential oil synthetic 75W-90 or API - GL-5 synthetic gear oil, SAE 75W-90 | S | |||
| Engine Coolant | w/Reservoir | 13.42 QTS. | 12.7 L | Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (Blue) or equivalent | S | ||
| Engine Oil | 4.0L Eng | Drain and Refill,w/Filter | 5.38 QTS. | 5.09 L | API - SN SAE 5W-30 | S | |
| Engine Oil | 4.0L Eng | Drain and Refill,w/o Filter | 5.13 QTS. | 4.85 L | API - SN SAE 5W-30 | S | |
| Fuel Tank | 28.00 GALS. | 105.99 L | S | ||||
| Power Steering Fluid | 3.00 PTS. | 1.41 L | Genuine NISSAN PSF-II or equivalent | S | |||
| Windshield Washer Fluid | 4.75 QTS. | 4.49 L | Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.