Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Symptoms		Reference
Operation	MAIN switch does not turn ON	Refer to Diagnosis Procedure .
	MAIN switch does not turn OFF	Refer to Diagnosis Procedure .
	ICC system cannot be set (MAIN switch turns ON/OFF)	Refer to Diagnosis Procedure .
	CANCEL switch does not function	Refer to Diagnosis Procedure .
	Resume does not function
	Set speed does not increase
	Set distance to a vehicle ahead cannot be changed
	ICC is not canceled when the reduction gear selector lever is "N" position	Refer to Work Procedure .
Display/Chime	ICC system display not appear	Refer to System Description .
Display/Chime	Chime does not sound	Refer to Diagnosis Procedure .
Control	Driving force is hunting	Refer to Diagnosis Procedure .
Function to detect a vehicle ahead	System frequently cannot detect a vehicle ahead	Refer to Diagnosis Procedure .
	Distance to detect a vehicle ahead is short	Refer to Diagnosis Procedure .
	System misidentifies a vehicle even though there is no vehicle ahead	Adjust radar alignment: Perform ICC system action test. Refer to Work Procedure .
	System misidentifies a vehicle in the next lane
	System does not detect a vehicle at all	Refer to Diagnosis Procedure .

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Symptom Table