Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Data Monitor
|
Item [Unit] |
Description |
|
|
IGN VOLT |
[V] |
Displays the power switch ON power supply voltage. |
|
CONTROL MODULE MALF |
[Off / On] |
Displays the chassis control module malfunction. |
|
CAN DIAG STATUS |
[Off / On] |
Displays CAN network diagnosis status. |
|
STP LAMP OFF RELAY 1 |
[Off / On] |
Displays stop lamp OFF relay 1 status. |
|
STP LAMP OFF RELAY 2 |
[Off / On] |
Displays stop lamp OFF relay 2 status. |
|
Stop lamp ON relay drive status |
[Off / On] |
Displays stop lamp ON relay status. |
|
VEHICLE SPEED |
[km/h] |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
[RPM] |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
[RPM] |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR |
[deg] |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
[G] |
Displays the decel G. |
|
SIDE G SENSOR |
[G] |
Displays the side G. |
|
YAW RATE SENSOR |
[deg/s] |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION |
[%] |
Displays the accelerator pedal position. |
|
THROTTLE CONTROL |
-- |
Displays but not used. |
|
SHIFT POSITION |
-- |
Displays but not used. |
|
BRAKE SWITCH 2 |
[Off / On] |
Displays the brake pedal operating status. |
|
BRAKE SWITCH 1 |
[Off / On] |
Displays the brake pedal operating status. |
|
Stop lamp switch |
[ACT / INACT] |
Displays the stop lamp switch status. |
|
STOP LAMP SW |
[ACT / INACT] |
Displays the stop lamp switch status. |
|
PRESS SENSOR |
[bar] |
Displays the brake fluid pressure. |
|
ABS |
[NORMAL / ABNOR] |
Displays the ABS function status. |
|
ABS MALF |
[NORMAL / ABNOR] |
Displays the ABS function status. |
|
EBD |
[NORMAL / ABNOR] |
Displays the EBD function status. |
|
TCS |
[NORMAL / ABNOR] |
Displays the TCS function status. |
|
TCS MALF |
[NORMAL / ABNOR] |
Displays the TCS function status. |
|
VDC |
[NORMAL / ABNOR] |
Displays the VDC function status. |
|
VDC MALF |
[NORMAL / ABNOR] |
Displays the VDC function status. |
|
VDC OFF SWITCH |
[Off / On] |
Displays VDC OFF status. |
|
PARKING BRAKE |
[Off / On] |
Displays parking brake status. |
|
DRV TRQ CTRL MODE |
[INITIAL / NORMAL / STOP 1 / STOP 2 / LIMIT 1 / PROHIBI] |
Displays the status of correction to slightly increase/decrease the drive torque. |
|
DRV TRQ CTRL PERMIS 1 |
[NO PER / PERMIS] |
Displays the permission status (basic requirement) of correction to slightly increase/decrease drive torque. |
|
DRV TRQ CTRL PERMIS 2 |
[NO PER / PERMIS] |
Displays the permission status (system requirement) of correction to slightly increase/decrease drive torque. |
|
DRV TRQ CTRL STOP |
[REQ / NO REQ] |
Displays the stop request status of correction to slightly increase decrease drive torque. |
|
DRV TRQ CTRL PROHIBIT |
[REQ / NO REQ] |
Displays the prohibition request status of correction to slightly increase/ decrease drive torque. |
|
ATC 1 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC 2 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC 4 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC 3 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
FL TIRE DISP |
[DEF / 1] |
Displays the status of front LH tire displayed on the information display in the combination meter. |
|
FR TIRE DISP |
[DEF / 1] |
Displays the status of front RH tire displayed on the information display in the combination meter. |
|
RL TIRE DISP |
[DEF / 1] |
Displays the status of rear LH tire displayed on the information display in the combination meter. |
|
RR TIRE DISP |
[DEF / 1] |
Displays the status of rear RH tire displayed on the information display in the combination meter. |
|
INTERRUPT DISP |
-- |
Displays but not used. |
|
TURN DISP |
[N STEER / LEFT / RIGHT] |
Displays the turning direction of intelligent trace control function on the information display in the combination meter. |
|
ATC DISP |
[Off / On] |
Displays the operating status of intelligent trace control function displayed on the information display in the combination meter. |
|
AEB |
-- |
Displays but not used. |
|
ATC 5 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC SETTING |
[Off / On] |
Displays the setting status of intelligent trace control function by steering switch. |
|
Buckle SW |
Off / On |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH avtive) |
Possible / Impossi |
Displays the e-Pedal active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) |
Off / On |
Displays the brake hold status at e-Pedal. |
|
Slope |
Slow / Steep |
Displays the slope status. |
|
PB active request (VDC) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) |
Normal / Ab normal |
Displays the chassis control module status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from chassis control module. |
|
PB SW |
Off / Release |
Displayed the parking brake switch status. |
|
ABH active request (CCM) |
REQ / NO REQ |
Displays the e-Pedal request status to electrically-driven intelligent brake unit from chassis control module. |
|
ABH malfunction |
Normal / Ab normal |
Displays the e-Pedal status. |
|
ABH indicator lamp |
-- |
Displays but not used. |
|
ABH active request (ADAS) 1 |
-- |
Displays but not used. |
|
PB |
RLS 1 / RLS 2 / APP 1 / APP 2 |
Displays the electric parking brake status. |
|
CCM (PB) |
Normal / Ab normal |
Displays the chassis control module status detected by electric parking brake control module. |
|
PB (ABH active) |
Possible / Impossi |
Displays the e-Pedal status at electric parking brake control module. |
|
PB malfunction status |
Normal / ABN 1 / ABN 2 / Not used |
Displays the electric parking brake status. |
|
ABH active request (ADAS) 2 |
-- |
Displays but not used. |
|
ABH active request (ADAS) 3 |
-- |
Displays but not used. |
|
ADAS |
NO REQ / REQ |
Displays the ADAS control unit status. |
|
ABH (ADAS) |
Inactive / ACTIVE |
Displays the brake stop hold request status from ADAS control unit. |
|
ABH SW |
-- |
Displays but not used. |
|
ABH SW indicator lamp |
-- |
Displays but not used. |
|
ABH active judge (CCM) |
OK / NG |
Displays the judgement of e-Pedal active states. |
|
e-Pedal status 1 |
NORMAL / MALF |
Displays e-Pedal status. |
|
e-Pedal estimated slope permission |
Not permission / Permission |
Displays slope estimated status. |
|
e-Pedal smooth stop permission |
Not permission / Permission |
Displays smooth stop status. |
|
Slope assist torque |
Nm |
Displays slope assist torque. |
|
Brake force limit torque |
Nm |
Displays brake force limit torque. |
|
Electric parking brake active request |
NO REQ / REQ |
Displays electric parking brake active request status. |
|
e-Pedal stop hold request |
NO REQ / REQ |
Displays the brake hold request status to electrically-driven intelligent brake unit from chassis control module. |
|
e-Pedal status 2 |
NORMAL / MALF |
Displays e-Pedal status. |
|
e-Pedal brake active request |
NO REQ / REQ |
Displays brake operation request status. |
|
e-Pedal SW indicator lamp 1 |
-- |
Displays but not used. |
|
e-Pedal SW indicator lamp 2 |
-- |
Displays but not used. |
|
ProPILOT status information |
Inactive / Active |
Displays ProPILOT status. |
|
e-Pedal stop hold request torque |
Nm |
Displays e-Pedal stop hold torque request. |
|
Brake operation request display |
NORMAL / MALF |
Displays brake operation request status. |
|
e-Pedal VCM status |
NORMAL / MALF |
Displays e-Pedal status from VCM. |
|
e-Pedal switch |
Off / On |
Displays e-Pedal switch status. |
|
Electric parking brake active status (driving) |
Inactive / Active |
Displays electric parking brake active status when drive condition. |
|
Mechanical parking brake status |
Release / Apply |
Displays parking brake status. |
|
ProPILOT active status |
Inactive / Active |
Displays ProPILOT status. |
|
Driver brake operation |
Off / On |
Displays brake pedal status. |
|
Driver request torque |
Nm |
Displays braking torque when releasing the accelerator pedal. |
|
Slope resistance estimate |
Nm |
Displays braking torque estimated from the driving torque and the driving motor speed. |
|
Traction motor speed |
RPM |
Display motor speed. |
|
Coast status |
Normal / Decrease / Increase |
Display braking torque limit to the VCM from ABS actuator and electric unit (control unit). |
|
Chassis dynamometer mode |
Off / On / Not used |
Displays mode status of the chassis dynamometer. |
|
e-Pedal hold status |
Release / Hold / Decrease / Increase |
Display vehicle stop status by e-Pedal. |
|
e-Pedal brake request torque |
Nm |
Display request braking force from VCM to electrically-driven intelligent brake unit. |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.