Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Nissan-Datsun GT-R Track EditionFACTORY OEM SERVICE PROCEDURE
ID Registration Without Transmitter Activation Tool
- Decrease air pressure for at least 30 seconds continuously for each tire (more than 10 psi (34.5 kPa) within 30 seconds) to place the TPM system into relearn mode for 30 minutes.
- Adjust the tire pressure for all wheels as indicated in the Sensor ID Registration Tire Pressure Specifications table.Sensor ID Registration Tire Pressure Specifications
Tire Position Tire Pressure - psi (kPa) Front Left 25 (172) Front Right 40 (276) Rear Right 60 (414) Rear Left 80 (551) - Start the Registration procedure using the INFO knob as follows: SETTINGS ->RESET TPMS ->RELEARN ->RESETTING. The TPMS warning lamp flashes continuously when the system is relearning the tire positions. See Fig 1.NOTE: If the Registration procedure is stopped before completion, the new tire positions are not learned. Perform the complete relearn procedure again to reset the tire positions.
- When the Registration procedure is successfully completed the TPMS warning lamp illuminates for 3 seconds and a chime sounds 3 times.
- Adjust the tire pressures to the cold tire pressure specification. If the tire pressures are correct, the TPMS warning lamp turns OFF.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.