2017 Nissan-Datsun Maxima SLFACTORY OEM SERVICE PROCEDURE

Component Location

GNSALKIA3990ZZ-990Courtesy of NISSAN NORTH AMERICA, INC.
No. Part Function
1. Rear power window switch RH Refer to REAR POWER WINDOW SWITCH .
2. Rear power window motor RH Refer to POWER WINDOW MOTOR .
3. Front power window motor RH Refer to POWER WINDOW MOTOR .
4. Power window and door lock/unlock switch RH Refer to POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH .
5. BCM
  • Supplies power to the window switches.
  • Controls retained power.
  • Refer to COMPONENT LOCATION for detailed installation location.
6. Main power window and door lock/unlock switch Refer to MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH .
7. Front power window motor LH Refer to POWER WINDOW MOTOR .
8. Front door lock assembly LH (key cylinder switch) Transmits operation condition of door key cylinder switch to main power window and door lock/unlock switch.
9. Front door switch LH
  • Detects door open/close condition and transmits to BCM.
  • Refer to FRONT DOOR SWITCH .
10. Rear power window motor LH Refer to POWER WINDOW MOTOR .
11. Rear power window switch LH Refer to REAR POWER WINDOW SWITCH .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.