Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Nissan-Datsun Sentra SLFACTORY OEM SERVICE PROCEDURE
Component Description
| Component | Reference/Function |
|---|---|
| ABS actuator and electric unit (control unit) | "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) " |
| Wheel sensor | "WHEEL SENSOR AND SENSOR ROTOR " |
| Stop lamp switch | "STOP LAMP SWITCH " |
| Steering angle sensor | "STEERING ANGLE SENSOR " |
| VDC OFF switch | "VDC OFF SWITCH " |
| Brake fluid level switch | "BRAKE FLUID LEVEL SWITCH " |
| Parking brake switch | "PARKING BRAKE SWITCH " |
| ABS warning lamp | "VDC/TCS/ABS: SYSTEM DESCRIPTION " |
| Brake warning lamp | |
| VDC OFF indicator lamp | |
| SLIP indicator lamp | |
| ECM | Transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
| TCM | Transmits the current gear position signal to ABS actuator and electric unit (control unit) via CAN communication. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.