Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Nissan-Datsun GT-R PremiumFACTORY OEM SERVICE PROCEDURE
GT-R Standard Setup - Factory Default Setting
GT-R Standard Setup - Factory Default Setting
| Measurement | Minimum | Preferred | Maximum |
|---|---|---|---|
| Left Front Caster (°) | 5.67 | 6 | 6.66 |
| Right Front Caster (°) | 5.67 | 6 | 6.66 |
| Left Front Camber (°) | -1.75 | -1.67 | -1.58 |
| Right Front Camber (°) | -1.75 | -1.67 | -1.58 |
| Front Toe (°) | 0.08 | 0.12 | 0.16 |
| Left SAI (°) | 9.34 | 9.5 | 9.66 |
| Right SAI (°) | 9.34 | 9.5 | 9.66 |
| Left Rear Camber (°) | -1.67 | -1.58 | -1.5 |
| Right Rear Camber (°) | -1.67 | -1.58 | -1.5 |
| Rear Toe (°) | 0.1 | 0.14 | 0.18 |
| Thrust Angle (°) | 0 | 0 | 0 |
| Left Toe Out, Inward (°) | 0 | 0 | 0 |
| Right Toe Out, Inward (°) | 0 | 0 | 0 |
| Left Toe Out, Outward (°) | 0 | 0 | 0 |
| Right Toe Out, Outward (°) | 0 | 0 | 0 |
| Left Max Turn, Inward (°) | 0 | 0 | 0 |
| Right Max Turn, Inward (°) | 0 | 0 | 0 |
| Left Max Turn, Outward (°) | 0 | 0 | 0 |
| Right Max Turn, Outward (°) | 0 | 0 | 0 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.