Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Nissan-Datsun Cube BaseFACTORY OEM SERVICE PROCEDURE
Component Description
| Component | Reference |
|---|---|
| A/F sensor 1 | "Description " |
| A/F sensor 1 heater | "Description " |
| Accelerator pedal position sensor | "Description " |
| ASCD brake switch | "Description " |
| ASCD steering switch | "Description " |
| ASCD vehicle speed sensor | "Description " |
| Battery current sensor | "Description " |
| Camshaft position sensor (PHASE) | "Description " |
| Crankshaft position sensor (POS) | "Description " |
| Cooling fan motor | "System Description " |
| Electric throttle control actuator | "Description " |
| Engine coolant temperature sensor | "Description " |
| EVAP canister purge volume control solenoid valve | "Description " |
| EVAP canister vent control valve | "Description " |
| EVAP control system pressure sensor | "Description " |
| Fuel injector | "Description " |
| Fuel level sensor | "Description " |
| Fuel pump | "Description " |
| Fuel tank temperature sensor | "Description " |
| Heated oxygen sensor 2 | "Description " |
| Heated oxygen sensor 2 heater | "Description " |
| Ignition signal | "Description " |
| Intake air temperature sensor | "Description " |
| Intake valve timing control solenoid valve | "System Description " |
| Knock sensor | "Description " |
| Mass air flow sensor | "Description " |
| Park/neutral position switch (M/T models) | "Description " |
| Transmission range switch (CVT models) | |
| PCV valve | "Description " |
| Refrigerant pressure sensor | "Description " |
| Stop lamp switch | "Description " |
| Throttle control motor | "Description " |
| Throttle control motor relay | "Description " |
| Throttle position sensor | "Description " |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.