Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
EV System Warning Lamp
The EV system warning lamp turns ON if a malfunction occurs with the EV system.
If VCM detects a malfunction or receives an EV system warning lamp request signal from any of other ECUs, it transmits an EV system warning lamp request signal to the combination meter via CAN communication.
The EV system warning lamp operates as per the following.
| Condition | Illumination status | ||||
|---|---|---|---|---|---|
| 2 seconds after turn power switch ON | ON (bulb check) | ||||
| If malfunction is present in EV system(1) | ON | ||||
| POWER ON just after occurrence of malfunction in EV system during charging (POWER OFF)(2) | ON | ||||
| Except above | OFF | ||||
|
|||||
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.