2009 Nissan-Datsun Rogue SL, AWDFACTORY OEM SERVICE PROCEDURE

Component Function Check

  1. CHECK COOLING FAN LOW SPEED FUNCTION

    With CONSULT-III 

    1. Turn ignition switch ON.
    2. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-III and touch "LOW" on the CONSULT-III screen.
    3. Check that cooling fans operates at low speed.

    Without CONSULT-III 

    1. Start engine and let it idle.
    2. Turn air conditioner switch and blower fan switch ON.
    3. Check that cooling fan operates at low speed.

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Check cooling fan low speed control circuit. Refer to "PROCEDURE A " in "DIAGNOSIS PROCEDURE ".

  2. CHECK COOLING FAN HIGH SPEED FUNCTION

    With CONSULT-III 

    1. Touch "HI" on the CONSULT-III screen.
    2. Check that cooling fans operates at higher speed than low speed.

    Without CONSULT-III 

    1. Turn ignition switch OFF.
    2. Turn air conditioner switch and blower fan switch OFF.
    3. Disconnect engine coolant temperature sensor harness connector.
    4. Connect 150Ω resistor to engine coolant temperature sensor harness connector.
    5. Restart engine and check that cooling fan operates at higher speed than low speed.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Check cooling fan high speed control circuit. Refer to "PROCEDURE B " in "DIAGNOSIS PROCEDURE ".

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.