Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Nissan-Datsun Rogue SL, AWDFACTORY OEM SERVICE PROCEDURE
Data Monitor
MONITOR ITEM CONDITION CHART
| Monitor Item | Condition |
|---|---|
| PUSH SW | Indicates [ON (pressed)/OFF (released)] condition of ignition knob switch |
| KEY SW | Indicates [ON (inserted)/OFF (removed)] condition of key switch |
| DR REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side) |
| AS REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger side) |
| BD/TR REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (back door) |
| IGN SW | Indicates [ON (ON or START position)/OFF (other than ON and START position)] condition of ignition switch ON position |
| ACC SW | Indicates [ON/OFF] condition of ignition switch ACC position |
| STOP LAMP SW | Indicates [ON/OFF] condition of stop lamp switch |
| P RANGE SW | Indicates [ON/OFF] condition shift lever park position |
| BD OPEN SW | This item is indicated, but not monitored |
| TR CANCEL SW | This item is indicated, but not monitored |
| DOOR LOCK SIG | Indicates [ON/OFF] condition of LOCK signal from Intelligent Key |
| DOOR UNLOCK SIG | Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key |
| KEYLESS TRUNK | This item is indicated, but not monitored |
| KEYLESS PANIC | Indicates [ON/OFF] condition PANIC button of Intelligent key |
| KEYLS PSD LH | This item is indicated, but not monitored |
| KEYLS PSD RH | This item is indicated, but not monitored |
| KEYLS PBD SIG | This item is indicated, but not monitored |
| DOOR SW DR | Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN communication |
| DOOR SW AS | Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via CAN communication |
| DOOR SW RR | Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN communication |
| DOOR SW RL | Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN communication |
| DOOR BK SW | Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communication |
| TRUNK SW | This item is indicated, but not monitored |
| VEHICLE SPEED | Displays the vehicle speed signal received from combination meter by numerical value [km/h] |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.