2008 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

Service Data And Specifications (SDS): Alternator

SERVICE DATA AND SPECIFICATIONS - ALTERNATOR

Type A2TJ0281ZC TG012C032
MITSUBISHI
Nominal rating 12 V - 110 A
Ground polarity Negative
Minimum revolution under no-load (when 13.5 V is applied) Less than 1,300 rpm Less than 1,100 rpm
Hot output current (when 13.5 V is applied) More than 27 A/1,300 rpm More than 27 A/1,500 rpm
More than 95 A/2,500 rpm More than 90 A/2,500 rpm
More than 116 A/5,000 rpm More than 112 A/5,000 rpm
Regulated output voltage 14.1 - 14.7 V 14.2 - 14.6 V
Minimum length of brush More than 5.00 mm (0.197 in) 4.4 mm (0.173 in)
Brush spring pressure 4.1 - 5.3 N (418 - 541 g, 14.8 - 19.1 oz) 1.8 - 3.1 N (0.184 - 0.320 kg, 0.40 - 0.70 lbs)
Slip ring minimum outer diameter More than 22.1 mm (0.870 in) More than 12.0 mm (0.47 in)
Rotor (field coil) resistance 1.8 - 2.2 Ξ© 2.3 Ξ©
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.