Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description: Notes
Power is supplied at all times
- From 50A fusible link (letter j, located in the fuse and fusible link box)
- To BCM terminal 70.
With ignition switch in ON or START position, power is supplied
- Through 10A fuse [No. 12, located in the fuse block (J/B)]
- To BCM terminal 38
- Through BCM terminal 68
- To main power window and door lock/unlock switch terminal 5
- To power window and door lock/unlock switch RH terminal 8
- To rear power window switches LH and RH terminal 8.
With ignition switch in ACC or ON position, power is supplied
- Through 10A fuse [No. 6, located in the fuse block (J/B)]
- To BCM terminal 11.
Ground is supplied
- To BCM terminal 67
- To main power window and door lock/unlock switch terminal 14
- Through body grounds M57 and M62.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.