2008 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

State Emission Standards - Gas: ARIZONA

NOTE: Curb idle only test are for vehicles with full-time 4WD, non-defeatable traction control and motorcycles. Curb idle and loaded cruise tests are performed on 1967-80 light-duty gasoline powered vehicles and all heavy-duty gasoline powered vehicles.
ARIZONA EMISSION STANDARDS - PHOENIX AREA (CURB IDLE & LOADED CRUISE TESTS)

Application (1) Idle HC ppm (CO %) (2) Loaded/Cruise HC ppm (CO %)
Light Duty Vehicles (6000 GVWR Or Less)
1967-71 4-Cyl. Or Less 500 (5.50) 500 (4.20)
1967-71 More Than 4-Cyl. 450 (5.00) 450 (3.75)
1972-74 4-Cyl. Or Less 400 (5.50) 400 (4.20)
1972-74 More Than 4-Cyl. 400 (5.00) 400 (3.75)
1975-78 4-Cyl. Or Less 250 (2.20) 250 (1.65)
1975-78 More Than 4-Cyl. 250 (2.00) 250 (1.50)
Light Duty Vehicles (8500 GVWR Or Less)
1979 4-Cyl. Or Less 220 (2.20) 220 (1.65)
1979 More Than 4-Cyl. 220 (2.20) 220 (1.50)
1980 220 (1.20) 220 (1.20)
1981 & Newer 220 (1.20) .....
Light Duty Trucks (6000 GVWR Or Less)
1967-80 (3) (3)
Light Duty Trucks (6001-8500 GVWR)
1967-74 (3) (3)
1975-78 350 (4.00) 350 (3.00)
1979 4-Cyl. Or Less 220 (2.20) 220 (1.65)
1979 More Than 4-Cyl. 220 (2.00) 220 (1.50)
1980 220 (1.20) 220 (1.20)
1981 & Newer 220 (1.20) .....
Heavy Duty Trucks (Greater Than 8500 GVWR)
1967-74 (3) (3)
1975-78 350 (4.00) 350 (3.00)
1979 & Newer 300 (4.00) 300 (3.00)
Motorcycles
1967 & Newer 1800 (5.50) .....
(1) 4-stroke engines only.
(2) Except AWD, non-defeatable traction control and motorcycles.
(3) Same as light duty vehicles.
ARIZONA EMISSION STANDARDS - PHOENIX AREA (IM147 TEST)

Application HC gpm (CO gpm) NOx gpm
Light Duty Vehicles
1981-82 3.0 (25.0) 3.5
1983-85 2.4 (20.0) 3.5
1986-89 1.6 (15.0) 2.5
1990-93 1.0 (12.0) 2.5
1994 & Newer 0.8 (12.0) 2.0
Light Trucks (6000 GVWR Or Less)
1981-85 4.0 (40.0) 5.5
1986-89 3.0 (25.0) 4.5
1990-93 2.0 (20.0) 4.0
1994 & Newer 1.6 (20.0) 3.0
Light Duty Trucks (6000-8500 GVWR)
1981-85 4.4 (48.0) 7.0
1986-87 4.0 (40.0) 5.5
1988-89 3.0 (25.0) 5.5
1990-93 3.0 (25.0) 5.0
1994 & Newer 2.4 (25.0) 4.0
NOTE: Curb idle test only for 1967-80 light-duty gasoline vehicles, all vehicles with full-time 4WD and/or non-defeatable traction control and motorcycles. Curb idle and loaded cruise tests are performed on all 1981 and later vehicles except those with full-time 4WD and/or non-defeatable traction control.
ARIZONA EMISSION STANDARDS - TUCSON AREA (CURB IDLE & LOADED CRUISE TESTS)

Application (1) Idle HC ppm (CO %) (2) Loaded/Cruise HC ppm (CO %)
Light Duty Vehicles (6000 GVWR Or Less)
1967-71 4-Cyl. Or Less 500 (5.50) .....
1967-71 More Than 4-Cyl. 450 (5.00) .....
1972-74 4-Cyl. Or Less 400 (5.50) .....
1972-74 More Than 4-Cyl. 400 (5.00) .....
1975-78 4-Cyl. Or Less 250 (2.20) .....
1975-78 More Than 4-Cyl. 250 (2.00) .....
Light Duty Vehicles (8500 GVWR Or Less)
1979 4-Cyl. Or Less 220 (2.20) .....
1979 More Than 4-Cyl. 220 (2.20) .....
1980 220 (1.20) .....
1981 & Newer 220 (1.20) 220 (1.20)
Light Duty Trucks (6000 GVWR Or Less)
1967-80 (3) (3)
Light Duty Trucks (6001-8500 GVWR)
1967-74 (3) (3)
1975-78 350 (4.00) .....
1979 4-Cyl. Or Less 220 (2.20) .....
1979 More Than 4-Cyl. 220 (2.00) .....
1980 220 (1.20) .....
1981 & Newer 220 (1.20) 220 (1.20)
Heavy Duty Trucks (Greater Than 8500 GVWR)
1967-74 (3) (3)
1975-78 350 (4.00) .....
1979-80 300 (4.00) .....
1981 & Newer 300 (4.00) 300 (3.00)
Motorcycles
1967 & Newer 1800 (5.50) .....
(1) 4-stroke engines only.
(2) Except AWD, non-defeatable traction control and motorcycles.
(3) Same as light duty vehicles.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.