2008 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

Glove Box Assembly: Removal

  1. Remove the shifter knob. Refer to "SELECTOR LEVER KNOB REMOVAL AND INSTALLATION " (CVT), "COMPONENTS OF CONTROL DEVICE AND CABLE " (MT).
  2. Remove the CVT or MT finisher.
  3. Remove the controller and controller finisher, disconnect the controller finisher connectors.
  4. Remove the cluster lid C upper mask (base).
  5. Remove the double meter (1) (SE-R).
    Fig 1: Identifying Double Meter
    G04928060Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove cluster lid C (1).
    1. Remove cluster lid C screws (A).
    2. Pull out cluster lid C (1) to disconnect harness connector and remove cluster lid C (1).
      Fig 2: Identifying Cluster Lid C And Cluster Lid C Screws
      G04928061Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Remove the instrument panel trim (RH).
  8. Remove glove box lower finisher screws, remove glove box lower finisher.
    Fig 3: Identifying Glove Box Lower Finisher Screws
    G04928062Courtesy of NISSAN MOTOR CO., U.S.A.
  9. Remove the glove box assembly
    1. Remove the two lower glove box assembly screws (A).
    2. Open the glove box and remove the four upper glove box assembly screws (B).
      Fig 4: Identifying Lower Glove Box Assembly Screws And Upper Glove Box Assembly Screws
      G04928063Courtesy of NISSAN MOTOR CO., U.S.A.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.