2007 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

Front Disc Brake

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CLZ25VB

FRONT DISC BRAKE SPECIFICATION

Unit: mm (in)
Brake pad Standard thickness (new) 11 (0.433)
Repair limit thickness 2.0 (0.079)
Disc rotor Standard thickness (new) 24.0 (0.945)
Repair limit thickness 22.0 (0.866)
Runout limit 0.035 (0.0014)
Maximum uneven wear (measured at 8 positions) 0.02 mm (0.0008 in) or less

CLZ25VJ

FRONT DISC BRAKE SPECIFICATION

Unit: mm (in)
Brake pad Standard thickness (new) 11 (0.433)
Repair limit thickness 2.0 (0.079)
Disc rotor Standard thickness (new) 26.0 (1.024)
Repair limit thickness 24.0 (0.945)
Runout limit 0.035 (0.0014)
Maximum uneven wear (measured at 8 positions) 0.02 mm (0.0008 in) or less

AD25V

FRONT DISC BRAKE SPECIFICATION

Unit: mm (in)
Brake pad Standard thickness (new) 11 (0.433)
Repair limit thickness 2.0 (0.079)
Disc rotor Standard thickness (new) 28.0 (1.102)
Repair limit thickness 26.0 (1.024)
Runout limit 0.035 (0.0014)
Maximum uneven wear (measured at 8 positions) 0.02 mm (0.0008 in) or less
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.