FRONT WHEEL ALIGNMENT (UNLADEN*1) SPECIFICATIONS

Application

Engine:

QG18DE

QR25DE

Camber
Degree minute (Decimal degree)

Minimum

-1°05'(-1.08°)

-1°12'(-1.2°)

Nominal

-0°20' (-0.33°)

-0°27' (-0.45°)

Maximum

0°25' (0.42°)

0°18'(0.3°)

Left and right difference

45' (0.75°) or less

Caster
Degree minute (Decimal degree)

Minimum

0°50' (0.83°)

0°58' (0.97°)

Nominal

1°35'(1.58°)

1°43' (1.72°)

Maximum

2°20' (2.33°)

2°28' (2.47°)

Left and right difference

45' (0.75°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

13°52' (13.87°)

14°03'(14.05°)

Nominal

14°37' (14.62°)

14°46'(14.77°)

Maximum

15°22'(15.37°)

15°31'(15.52°)

Total toe-in

Distance (A - B) mm (in)

Minimum

1 (0.039")

Nominal

2 (0.079")

Maximum

3 (0.118")

Angle (left plus right)
Degree minute (Decimal degree)

Minimum

5.5' (0.08°)

Nominal

11'(0.18°)

Maximum

16'(0.27°)

Wheel turning angle
Full turn⁽¹⁾

Inside
Degree minute (Decimal degree)

Minimum

34° (34.0°)

29° (29.0°)

Nominal

37° (37.0°)

32° (32.0°)

Maximum

38° (38.0°)

33° (33.0°)

Outside
Degree minute (Decimal degree)

Nominal

31° (31.0°)

27° (27.0°)

*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

⁽¹⁾	On power steering models, wheel turning force (at circumference of steering wheel) of 98 to 147 N (10 to 15 kg, 22 to 33 lb) with engine idle.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Wheel Alignment: 2006: Front

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?