Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Nissan-Datsun Altima BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 5.00 OZS. | 0.14 L | PAG 46 | Approximate capacity. | S | |
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 | S | |||
| Engine Coolant | 2.5L Eng | w/Reservoir tank | 8.03 QTS. | 7.59 L | 50/50 mixture of Genuine NISSAN Long Life Antifreeze/Coolant and demineralized or distilled water | S | |
| Engine Oil | 2.5L Eng,Gas | Drain and Refill,w/Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-30 | S | |
| Engine Oil | 2.5L Eng,Gas | Drain and Refill,w/o Filter | 4.25 QTS. | 4.02 L | API - SAE 5W-30 | S | |
| Fuel Tank | 20.00 GALS. | 75.7 L | S | ||||
| Manual Transmission Fluid | 1.75 QTS. | 1.65 L | Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi, SAE 75W-85 | S | |||
| Power Steering Fluid | 1.00 QTS. | 0.94 L | Genuine NISSAN Power Steering Fluid or equivalent | S | |||
| Windshield Washer Fluid | N/A | N/A | Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.