Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE
Data Monitor Item
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR ITEM DESCRIPTION
| Monitored item ["OPERATION or UNIT"] | Description |
|---|---|
| DOOR SW-DR [ON/OFF] | Displays "Door open (ON)/door closed (OFF)" status judged from the front door switch (driver side) signal. |
| DOOR SW-AS [ON/OFF] | Displays "Door open (ON)/door closed (OFF)" status judged from the front door switch (passenger side) signal. |
| DOOR SW-RR [ON/OFF] | Displays "Door open (ON)/door closed (OFF)" status judged from the door lock assembly rear RH (door switch) signal. |
| DOOR SW-RL [ON/OFF] | Displays "Door open (ON)/door closed (OFF)" status judged from the door lock assembly rear LH (door switch) signal. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.