Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE
Generator Specifications
WARNING: This page is about a different car, the 2004 Nissan Murano and 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR SPECIFICATIONS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Generator Model | LR1110-723, HITACHI | |||||
| Nominal Rating | 12 Volts, 110 Amps | |||||
| Ground Polarity | Negative | |||||
| Minimum RPM Under No Load (With 13.5 Volts Applied) (1) | 1200 RPM | |||||
| Minimum RPM Under No Load (With 13.5 Volts Applied) (2) | 1100 RPM | |||||
| Hot Output Current (With 13.5 Volts Applied) (1) | ||||||
| At 1300 RPM | 24 Amps | |||||
| At 2500 RPM | 87 Amps | |||||
| At 5000 RPM | 105 Amps | |||||
| Hot Output Current (With 13.5 Volts Applied) (2) | ||||||
| At 1300 RPM | 35 Amps | |||||
| At 1800 RPM | 70 Amps | |||||
| At 2500 RPM | 91 Amps | |||||
| At 5000 RPM | 110 Amps | |||||
| Regulated Output Voltage | 14.1-14.7 Volts | |||||
| Minimum Brush Length | .236 in. (6.00 mm) | |||||
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |||||
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |||||
| Rotor (Field Coil) Resistance | 2.16-2.45 Ohms | |||||
|
||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
