2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

Component Description

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT DESCRIPTION CHART

Part name Description
BCM Provides power and ground and controls timer functions for the interior room lamps and cargo lamp.
Key switch Provides key in ignition status to the BCM.
Door switches Provides door OPEN/CLOSED status to the BCM.
Back door switch Provides back door OPEN/CLOSED status to the BCM.
Main power window and door lock/unlock switch Provides door lock/unlock position switch status to the BCM.
Power window and door lock/unlock switch RH
Front door lock assembly LH (key cylinder switch) Provides door lock/unlock status to the BCM.
Back door key cylinder switch
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.