Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE
Service Data
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH SERVICE DATA
| Pedal height from dash panel | 137.6 to 147.6 mm (5.417 to 5.811 in.) | |
| Clutch pedal free play | 5.0 - 15.0 mm (0.197 - 0591 in.) | |
| Clutch pedal push rod play at pedal top | 1.0 - 5.0 mm (0.039 - 0.197 in.) | |
| Slotted spring pin protrusion | Maximum | 1.5 - 3.5 mm (0.059 - 0.138 in.) |
| Clutch disc rivet head depth | Maximum | 0.3 mm (0.012 in.) |
| Clutch disc assy runout | Minimum | 0.8 mm (0.031 in.) |
| Diaphragm spring finger wear | Maximum depth | 0.5 mm (0.020 in.) |
| Maximum width | 6.0 mm (0.236 in.) | |
| Flywheel sub-assy runout | Maximum | 0.1 mm (0.004 in.) |
| Diaphragm spring tip non-alignment | Maximum depth | 0.5 mm (0.020 in.) |
| Clutch release point from pedal full stroke end position | 25 mm (0.98 in.) or more | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.