2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

System Tests: Notes

WARNING: This page is about a different car, the 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For preliminary check, see PRELIMINARY CHECK  , for power supply and ground circuit check, see POWER SUPPLY & GROUND CIRCUIT TEST  , for door, hood and glass hatch switch check, see DOOR, HOOD & GLASS HATCH SWITCH TEST  , for security indicator lamp check, see SECURITY INDICATOR LAMP TEST  , for door key cylinder switch check, see FRONT DOOR KEY CYLINDER SWITCH TEST  , for back door key cylinder switch check, see BACK DOOR KEY CYLINDER SWITCH TEST  , for vehicle security horn alarm check, see VEHICLE SECURITY HORN ALARM TEST  , and for vehicle security headlamp alarm check, see VEHICLE SECURITY HEADLAMP ALARM OPERATION TEST  . For remote keyless entry, see REMOTE KEYLESS ENTRY SYSTEM - PATHFINDER article.

For symptom chart, see Fig 1 , for preliminary check, see PRELIMINARY CHECK  .

Fig 1: Identifying Symptom Chart
G00217408Courtesy of NISSAN MOTOR CO., U.S.A.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.