2004 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close hood and front door RH, and lift wiper arms away from windshield (to prevent glass damage by wiper operation).
    NOTE: When auto active test is performed with hood opened, sprinkle water on windshield beforehand.
  2. Turn ignition switch OFF.
  3. Turn ignition switch ON and, within 20 seconds, press front door switch LH 10 times. Then turn ignition switch OFF.
  4. Turn ignition switch ON within 10 seconds after ignition switch OFF.
  5. When auto active test mode is actuated, horn chirps once.
  6. After a series of operations is repeated three times, auto active test is completed.
    NOTE: When auto active test mode has to be cancelled halfway, turn ignition switch OFF.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.