WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

When "MAINT" switch is pressed, vehicle information screen displays. Display indicates engine oil, tire rotation, and tire pressure.
Pressing "MAINT" switch once cycles display from engine oil --> tire rotation --> tire pressure^Note --> engine oil.
NOTE: There is no low tire pressure warning system when display is OFF.

Engine Oil and Tire Rotation Interval

Operating the joystick left/right, service interval distance can be set.
When journey distance is the same as service interval distance, alert is displayed. (SERVICE ALERT setting is ON.)
Selected service interval distance is 0 - 7,500 miles (0 - 12,000 km) in increments of 500 miles (800 km).
Press and hold "TRIP RESET" or "MAINT" switch for 1.5 seconds or longer, to reset present journey distance.
Settings cannot be changed during driving.

Fig 1: LCD Monitor Display (3 of 3)
Courtesy of NISSAN MOTOR CO., U.S.A.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

MAINT Switch (Maintenance Switch)

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?