2004 Nissan-Datsun Sentra Base, StandardFACTORY OEM SERVICE PROCEDURE

Component Description

NOTE: If DTC P0125 is displayed with P0117, P0118, first perform TROUBLE DIAGNOSISΒ  for DTC P0117, P0118 ECT SENSORΒ .

The engine coolant temperature sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

Fig 1: Identifying ECT Sensor
G00774871Courtesy of NISSAN MOTOR CO., U.S.A.

< Reference data >Β 

Fig 2: Voltage And Rasistance Specification Chart
G00774872Courtesy of NISSAN MOTOR CO., U.S.A.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.